Epson TM-T88V-i Recovery Mode Instructions

Let Lavu meet all of your hardware needs at the Lavu Shop!

Epson TM-T88V-i Recovery Mode Instructions

Sometimes the Epson TM-T88V-i will need to be reset or it may require a firmware update. To do so, you will need to put the printer into recovery mode. Follow the instructions below to complete this action. When resetting or updating the firmware on the printer, please unplug all USB peripherals attached to the printer.

 

  1. Turn the printer off. The power switch is located on the front of the printer.
  2. Press in and hold the reset button located on the back of the printer.

Figure 1

  1. Turn printer on while still holding in the reset button.
  2. The LED light on back of printer will turn on (orange). When it turns off, let go of button.
  3. If recovery mode was successfully initiated the printer will print out “UPDATER RUNNING DO NOT REBOOT”
  4. Followed by “Pre Install Scripts Successful, Main Install Scripts Running, Update Finished”.

***It may take a couple minutes to receive this message****

Let Lavu meet all of your hardware needs at the Lavu Shop!

Have more questions? Submit a request

Comments

Powered by Zendesk