Pairing and Updating Your Lavu Kiosk Chip and Tap Reader

Pairing the PayPal Reader

Before You Begin

  • Make sure you turn on your iOS device Bluetooth settings before pairing the reader.
  • Charge and power on your Lavu Kiosk credit card reader.

Best Practices

There are a few things you can do to ensure your Kiosk is always operational:

  • Keep the credit card reader and iPad plugged into power all of the time. This will ensure that the reader does not lose its pairing with the iPad.
  • Turn the iPad Auto-Lock settings to 'Never'.

Pairing in the App

  1. Open the Kiosk App
  2. Triple tap your logo in the top left corner of the screen
  3. Enter in your admin PIN
  4. Tap on Card Reader Settings
  5. Tap Connect
  6. Select the reader you would like to pair with Lavu Kiosk
  7. The reader should now be paired and ready for use

kioskreadersettings.jpg

Updating a PayPal Chip and Tap Reader

Sometimes the Chip and Tap Reader will need to be updated before it can be used. Complete the following steps to manually check for an update.

NOTE: The reader must be paired to the iPad prior to an update being conducted.

  1. Triple tap the logo in the top left corner of the screen
  2. Enter in your PIN
  3. Tap on Card Reader Settings
  4. Tap Update
  5. If an update is available the reader will then be updated

Now that this is complete, we can finish out your Lavu Kiosk hardware.

Lavu Kiosk Articles

The following are a series of articles designed to help you to set up your new Lavu Kiosk. Click on the article title to open the page.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.